Computer simulation and research of the stress-strain state of fire tank truck construction
DOI:
https://doi.org/10.33408/2519-237X.2018.2-1.81Keywords:
tank truck, dynamics, sensors, acceleration, deformation, computer modeling, research, engineering design, structural optimizationAbstract
Purpose. There is a necessity in universal methodology developed for assessing the stress-strain state of a fire truck construction, taking into account the factors influencing the character of the dynamic process.
Methods. The studies were carried out with a help of modern computational software complex, along with high-precision instruments and equipment with the installation of special sensors on essential places of construction for monitoring.
Findings. The developed methodology render possible to improve the technology of elements and units design of shell type. The peculiarity of this methodology is in the combined usage of the of experimental measurements and computer simulation results.
Application field of research. The supplied research results are obtained in the field of strength properties of shells and can be used in repair works for the purpose of optimization of shell construction and fixing supports for liquids containers, as well as for the design of new samples of special equipment, in particular strength elements of tank trucks for fire trucks.
Conclusions. A detailed analysis of the obtained results allows to develop constructional changes for the improvement of fire truck exploitation.
References
Bogomaz G.I., Sirota S.A. Kolebaniya zhidkosti v bakakh. Metody i rezul'taty eksperimental'nykh issledovaniy [Fluctuations of liquid in tanks. Methods and results of experimental studies]. Dnepropetrovsk: Institut tekhnicheskoy mekhaniki NAN Ukrainy i NKA Ukrainy, 2002. 306 p. (rus)
Birger I.A., Mavlyutov R.R. Soprotivlenie materialov [Strength of materials]. Moscow: Nauka, 1986.p.560 (rus)
Bezukhov N.I. Osnovy teorii uprugosti, plastichnosti i polzuchesti [Fundamentals of the theory of elasticity, plasticity and creep]. Moskow: Vysshaja shkola, 1993. 512 p. (rus)
Kornienko N.A., Bespal'ko S.V., Bogachev V.I. Primenenie uravneniy v chastnykh proizvodnykh dlya opredeleniya chastot sobstvennykh kolebaniy zhidkogo gruza v kotle zheleznodorozhnoy tsisterny [Application of solutions in partial derivatives for determining the speeds of movement of liquid cargo in a cauldron of a railway tank]. Moscow: MIIT, 2010.7 p. (rus)
Petrosyan A.S. Dopolnitel'nye glavy gidrodinamiki tyazheloy zhidkosti so svobodnoy granitsey [Additional chapters of the hydrodynamics of a heavy fluid with a free boundary]. Moscow: IKI RAN. 2010. 127 p. (rus)
Bogomaz G.I. Dinamika zheleznodorozhnykh vagonov-tsistern [Dynamics of railway tank wagons] Kiev: Naukova dumka, 2004. 224 p. (rus)
Golovchenko V.I., Ivanina N.L. Osnovnye polozheniya rascheta krepleniya tsisterny k shassi avtomobilya avtotoplivozapravshchika [The main provisions for calculating the mounting of a tank to the chassis of an auto fueler's car]. Vestnik NTU «KhPI», 2012. No. 22. Pp. 40–47. (rus)
Korotkevich S.G., Kovtun V.A. Prognozirovanie ekspluatatsionnoy nadezhnosti pozharnykh avtotsistern s primeneniem podkhodov komp'yuternogo modelirovaniya [Forecasting the operational reliability of fire tankers with the use of computer simulation]. Proc. Intern. scientific-practical. Conf. «Gorenie i problemy tusheniya pozharov». Moscow: VNIIPO, 2017. Part 1. Pp. 437–439. (rus)
Shimanovskiy A.O., Putyato A.V. Modelirovanie peretekaniya zhidkosti v rezervuare s ispol'zovaniem programmnykh kompleksov ANSYS i STAR-CD [Modeling of fluid flow in the reservoir using ANSYS and STAR-CD software complexes]. Vestnik Ural'skogo gosudarstvennogo tekhnicheskogo universiteta. UPI. Komp'yuternyy inzhenernyy analiz, 2005. No. 11 (63). Pp. 103–110. (rus)
Eliseev K.V., Vychislitel'nyy T.V. praktikum v sovremennykh CAE-sistemakh [Computational practice in modern SAE Systems]. Komp'yuternoe modelirovanie. St. Petersburg Polytechnic University, 2008. Pp. 36–54. (rus)
Kaplun A.B., Morozov E.M. Olfer'eva M.A. ANSYS v rukakh inzhenera: Prakticheskoe rukovodstvo [ANSYS in the hands of an engineer: a practical guide]. Moscow: Editorial URSS, 2003. 272 p. (rus)
Marochnik stali i splavov [Stamp steel and alloys], available at http://splav-kharkov.com (accessed: November 20, 2017). (rus)
Myachenkov V.I. Raschety mashinostroitel'nykh konstruktsiy metodom konechnykh elementov: Spravochnik [Calculations of engineering structures by the finite element method: reference book]. Moskva: Mashinostroenie, 1989. 520 p. (rus)
Benerdzhi P.V., Batterfild R.I. Metody granichnykh elementov v prikladnykh naukakh [Boundary element methods in applied sciences]. Moscow, 1984. 494 p. (rus)
Bespal'ko S.V. Razrabotka i analiz modeley povrezhdayushchikh vozdeystviy na kotly tsistern dlya perevozki kriogennykh produktov [Development and analysis of models of damaging effects on the boilers of tanks for transportation of cryogenic products]. Grand PhD tech. sci. diss. Synopsis: 05.22.07. Moscow, 2000. 427 p. (rus)
Published
How to Cite
License
Copyright (c) 2018 Kovtun V.A., Korotkevich S.G., Zharanov V.A.
CC «Attribution-NonCommercial» («Атрибуция — Некоммерческое использование») 4.0
