Non-destructive testing methods of assemblies and units of fire and emergency technique

Authors

  • Viktor A. Biryuk State Educational Establishment «University of Сivil Protection of the Ministry for Emergency Situations of the Republic of Belarus»; 220118, Belarus, Minsk, ul. Mashinostroiteley, 25 https://orcid.org/0000-0002-3110-9557
  • Vladimir N. Pasovets State Educational Establishment «University of Сivil Protection of the Ministry for Emergency Situations of the Republic of Belarus»; 220118, Belarus, Minsk, ul. Mashinostroiteley, 25 https://orcid.org/0000-0001-9451-9513
  • Mark M. Zhurov State Educational Establishment «University of Сivil Protection of the Ministry for Emergency Situations of the Republic of Belarus»; 220118, Belarus, Minsk, ul. Mashinostroiteley, 25 https://orcid.org/0000-0001-5228-7371

DOI:

https://doi.org/10.33408/2519-237X.2020.4-4.389

Keywords:

fire truck, tank, deformation, sensor, mechanical stress, non-destructive methods, welded joint

Abstract

Purpose. The substantiation of the use of modern methods for assessing and monitoring the state of fire and emergency equipment in order to ensure its trouble-free operation.

Methods. Non-destructive methods, computer simulation, tensometry.

Findings. The review of methods existing for assessment and control of assemblies and units of fire and rescue vehicles technical state is performed. Some results of their application are presented. The application possibility of non-destructive testing methods is assessed.

Application field of research. Fire rescue equipment, welded joints of technical objects.

Author Biographies

Viktor A. Biryuk, State Educational Establishment «University of Сivil Protection of the Ministry for Emergency Situations of the Republic of Belarus»; 220118, Belarus, Minsk, ul. Mashinostroiteley, 25

Chair of Industrial Safety, Head of Chair; PhD in Technical Sciences, Associate Professor

Vladimir N. Pasovets, State Educational Establishment «University of Сivil Protection of the Ministry for Emergency Situations of the Republic of Belarus»; 220118, Belarus, Minsk, ul. Mashinostroiteley, 25

Chair of Industrial Safety, Associate Professor; PhD in Technical Sciences, Associate Professor

Mark M. Zhurov, State Educational Establishment «University of Сivil Protection of the Ministry for Emergency Situations of the Republic of Belarus»; 220118, Belarus, Minsk, ul. Mashinostroiteley, 25

Chair of Combustion and Explosion Processes, Associate Professor; PhD in Technical Sciences

References

Goncharov I.N., Smilovenko O.O. Sistemnyy analiz faktorov, vliyayushchikh na prokhodimost' pozharnogo avariyno-spasatel'nogo avtomobilya [System analysis of the factors influencing cross-country ability of emergency and rescue vehicle]. Journal of Civil Protection, 2019. Vol. 3, No 1. Pp. 46–52. (rus). DOI: https://www.doi.org/10.33408/2519-237X.2019.3-1.46.

Kazutin E.G., Algin V.B., Kovalenko A.V. Metodika otsenki raskhoda resursa metallicheskikh tsistern pozharnykh avtomobiley s uchetom probega i korrozionnykh protsessov [Evaluation method of lifetime of fire trucks’ metallic tanks with consideration of mileage and corrosion processes]. Mekhanika mashin, mekhanizmov i materialov, 2018. No. 3 (44). Pp. 36–42. (rus)

Kalinichenko N.P., Kalinichenko A.N. Vizual'nyy i izmeritel'nyy kontrol' Uchebnoe posobie dlya podgotovki spetsialistov I, II i III urovnya [Visual and measuring control: tutorial for the training of specialists of I, II and III levels]. Tomsk: Tomsk Polytechnic University, 2009. 300 p. (rus)

Shakhmatov M.V., Erofeev V.V., Kovalenko V.V. Rabotosposobnost' i nerazrushayushchiy kontrol' svarnykh soedineniy s defektami [Performance and non-destructive testing of welded joints with defects]. Chelyabinsk: TsNTI, 2000. 227 p. (rus)

Morozov E.M., Muyzemnek A.Yu., Shadskiy A.S. ANSYS v rukakh inzhenera: Mekhanika razrusheniya [ANSYS in the engineer's hands: Destruction mechanics]. 2nd ed. Moscow: LENAND, 2010. 456 p. (rus)

Kovtun V.A., Korotkevich S.G., Pasovets V.N., Todorov I. Optimizatsiya konstruktsii tsisterny pozharnogo avtomobilya ATs-5.0-50/4 na baze shassi MAZ-5337 metodom komp'yuternogo modelirovaniya [Optimization of the fire truck’s tank AС-5.0-50/4 based on the chassis MAZ-5337 by the method of computer modeling]. Journal of Civil Protection, 2019. Vol. 3, No 1. Pp. 38–45. (rus). DOI: https://www.doi.org/10.33408/2519-237X.2019.3-1.38.

Kovtun V.A., Korotkevich S.G., Pasovets V.N. Tenzometricheskie issledovaniya napryazhennogo sostoyaniya tsistern pozharnykh avtomobiley pri razlichnykh rezhimakh dvizheniya [Tenzometric research of stress state of fire truck tanks at various motion modes]. Journal of Civil Protection, 2020. Vol. 4, No. 1. Pp. 39–47. (rus). DOI: https://www.doi.org/10.33408/2519-237X.2020.4-1.39.

Downloads


Abstract views: 63
PDF Downloads: 66

Published

2020-11-20

How to Cite

Biryuk, V. A., Pasovets, V. N. and Zhurov, M. M. (2020) “Non-destructive testing methods of assemblies and units of fire and emergency technique”, Journal of Civil Protection, 4(4), pp. 389–396. doi: 10.33408/2519-237X.2020.4-4.389.